V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Note! Check that the indicator on the belt tensioner is within the marked area.
-
Remove the upper timing cover.
Installing the right-hand engine mounting
Install the lower timing cover.
Screw the engine mounting into place on the engine. Tighten to 67 Nm.
Install:
-
the screws on the bracket for the bodywork. Tighten to 50 Nm.
Finishing
Remove the lifting beam and lifting hook.
Install:
-
the power steering reservoir
-
the metal bracket for the power steering hose on the rotation protection for the auxiliaries belt
-
the auxiliaries belt
-
the rear camshaft cover.
-
the trigger wheel. Tighten to 17 Nm
-
the camshaft position (CMP) sensor housing. Tighten to 5 Nm
-
the hose for the crankcase ventilation on the camshaft cover.
Installing components
