V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Remove the two hose clamps from protective tube
-
Carefully pull out the sensor
-
Remove the relay cover and cut the tie strap
-
Disconnect connector and lift off engine speed (RPM) sensor.
Installing engine speed (RPM) sensor
-
Connect connector
-
Clamp cable to the bracket with tie strap
-
Route the cable via the protective tube to the cylinder head
-
Close protective tube with two hose
-
Reinstall relay cover.
Installing engine speed (RPM) sensor on the engine