V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Tighten the sensor screws lightly.
Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection. Tighten the nut.
Lock the nut with the lock washer.
Adjusting the gear-shift position sensor
See Checking and adjusting the gear-shift position sensor.
Installing the cable harness on the transmission
-
Position the cable harness
-
Press the connector into place on the bracket
-
Connect the connectors
-
Secure the cable harness using 2 cable ties
-
Position the fusebox and screw it into place.
Installing the gear-shift position sensor, continued
Install
-
the cable duct on the screw. Tighten the nut. Tighten to 25 Nm
-
the lever on the gear shift linkage rod. Tighten to 16 Nm
-
the gear selector cable on the lever.
Installing the air cleaner (ACL) housing and intake manifold
See Checking and adjusting the gear-shift position sensor.
Checking diagnostic trouble codes (DTCs)