V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Transmission Position Switch/Sensor: Removal and Replacement
Replacing the gear-shift position sensor
Removal
Removing the air cleaner (ACL) housing and intake manifold
See Checking and adjusting the gear-shift position sensor, AW55-50/51SN See: Adjustments.
Remove the transmission cable from the lever. Move the cable to one side
See Checking and adjusting the gear-shift position sensor, AW55-50/51SN See: Adjustments.
Removing the connector from the transmission
Disconnect the cable harness from the transmission.
Remove the screws for the fusebox. Fold the fusebox to one side.
Cut off the 2 tie straps.
Separate the connector.
Disconnect the connector from the bracket.
Removing the gear-shift position sensor
