V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Clean the mating surfaces.
-
Install a new sealing ring on the engine coolant temperature (ECT) sensor.
-
Install the engine coolant temperature (ECT) sensor. Tighten the engine coolant temperature (ECT) sensor to 10 Nm.
-
Reconnect the connectors.
-
Reinstall the connector on the bracket.
Installing the thermostat housing cover
-
Clean the mating surfaces.
-
Install a new gasket on the thermostat.
-
Install the thermostat housing. Tighten the thermostat housing to 17 Nm.
Note! Refill the coolant. Run the engine to operating temperature. Top up as necessary. Function test. Check for leakage.
Check for leakage. Reinstall the fuel rail cover. Reinstall the upper camshaft cover, see Replacing the cover on top of the engine See: Body and
Frame/Access Cover/Service and Repair.
Connect the connector. Secure the connector on the bracket.
