V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Versions with ECC
Remove ECC
If the switch is defective the whole control panel must be replaced.
-
Remove the panel by carefully inserting a weatherstrip tool along the edge and pull the panel forwards.
The knobs remain in position.
-
Remove the four torx mounting screws
-
Remove the rear section of the bracket. Press carefully at the edge with a screwdriver.
NOTE: The radio must be pulled forward a few centimeters before the rear section of the bracket can be removed.
-
Remove the screw behind the rear section of the bracket. Pull the bracket forward slightly.
-
Disconnect the connectors from the switches and the radio. Remove the bracket.
-
Lean the control panel (unit) downwards and disconnect the connector and hose.
-
Remove the unit
Install in reverse order.