V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Remove the bushing. Use special tool 999 5624 Counterhold See: Tools and Equipment/999 5624 Counterhold and 999 5625 Punch See: Tools and
Equipment/999 5625 Punch.
Lubricate the tool 999 5624 Counterhold See: Tools and Equipment/999 5624 Counterhold with soap water to facilitate removal.
Cut the bushing in the necessary places so that the tool can be correctly installed.
Press the bushing out of the control arm.
Note! Special tool 999 5625 Punch See: Tools and Equipment/999 5625 Punch cuts through the rubber.
Note! Before using this tool 999 5625 Punch See: Tools and Equipment/999 5625 Punch ensure that the tool is positioned over the pin 999
5626 Counterhold See: Tools and Equipment/999 5626 Counterhold. If necessary, grind out any unevenness.
Install the front bushing in the control arm
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair/Removal and Replacement/Flanged Joint, Assembling.
