V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Remove the front rubber bushing from the trailing arm. Use special tool: 999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576
See: Tools and Equipment/999 5575 Puller Cylinder Used With Hydraulic Pump -5576.
Install bushing 999 5669 Press tool See: Tools and Equipment/999 5669 Press Tool and shaft 999 5588 Puller rod See: Tools and Equipment/999
5588 Puller Rod on special tool 999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575
Puller Cylinder Used With Hydraulic Pump -5576.
Install the shaft in the rubber bushing.
Install bushing 999 5669 Press tool See: Tools and Equipment/999 5669 Press Tool. Secure the bushing using the nut.
Press the rubber out of the trailing arm. Remove the rubber from the special tool.
Installation
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair/Removal and Replacement/Flanged Joint, Assembling.
Install trailing arm front rubber bushing
