V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Shift Interlock Solenoid: Removal and Replacement
Replacing the shift lock solenoid and micro-switch
Removal
Conditions
-
Remove the center console according to Rear center console See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Rear Center Console.
Removing the shift lock solenoid with micro-switch
Caution! Move the gear selector to position L to prevent damage when removing / installing the micro-switch.If the shift lock solenoid does not
operate: Turn the ignition key to position 1. Depress the SHIFTLOCK OVERRIDE button to move the gear selector lever.
-
Remove the connector from the gear shift. Disconnect the connector (A)
-
Remove the clamp (B). Remove the solenoid.
Caution! Undo the clamp (B) on the reverse of the bracket to prevent damage to the clamp.
-
Remove the micro-switch: Press the lugs together.
Installation
Installing the shift lock solenoid with micro-switch