V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Insert the key in the ignition switch.
Try to remove the key from the ignition switch with the gear selector in all the different gear positions. Do not use more force than is usually required to
remove the key.
Note! It should only be possible to remove the key from the ignition switch when the gear selector lever is in P position.
The cable sleeve must be adjusted if the key can be removed from the ignition switch when the gear selector lever is in another position. See Checking
and adjusting the cable in the center console.
Install:
-
the center console according to Rear center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Rear Center Console
-
the lower steering column cover
-
the lower dashboard.