V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Caution! Move the gear selector to position L to prevent damage when removing / installing the micro-switch.Turn the ignition key to position
I. Depress the SHIFTLOCK OVERRIDE button to move the gear selector lever.
-
Press the micro-switch into place on the gear selector
-
Install the micro-switch. Secure the micro-switch using the clamp
-
Connect the connector. Secure the connector on the gear selector
-
Install the center console according to Rear center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Rear Center Console.
Checking the shift lock function
See Shift lock and ignition switch interlock, AW55-50/51SN See: Service and Repair/Shift Lock And Ignition Switch Interlock
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).