V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
The following lock nuts must be used if the centre nut for the drive shaft is replaced.
-1997:
Use curved spring washer, P/N 3087 0246, and lock nut, P/N 3087 2409.
Tighten to 240 Nm.
1998 - :
Use yellow flanged lock nut (black washer), P/N 3089 6406.
Tighten to:
1. : 180 Nm
2. : tighten a further + 30 ° in a single movement.
