V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
If there is not a nozzle:
Take out the unmodified (complete) nozzle.
Measure 55 mm up from the base: Cut off the nozzle.
Drill a 3 mm hole 36.5 mm from the tip.
Measure 8 mm from the tip.
Cut the nozzle.
If there is not a nozzle:
Take out the unmodified (complete) nozzle.
Measure 55 mm up from the base: Cut off the nozzle.
Drill a 3 mm hole 36.5 mm from the tip.
Measure 8 mm from the tip.
Cut the nozzle.