V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Pull the cable out through the rubber grommet
-
Take the connector from the kit.
-
Undo the catch.
-
Install the cable end pins in the connector.
1. Blue (Blue, BL)
2. Green (Green, GN)
3. Violet (Violet, VO)
4. Yellow (Yellow, Y)
5. White (White, W)
6. Black (Black, SB)
-
Press back the connector's catch.
-
Take the long cable from the kit. Connect it to the connector which has just been prepared.
-
Route the cable over to the side of the car and on back under the sills along the existing cable harnesses backwards and into the cargo
compartment.
-
Position the cable so that is does not get trapped or damaged.