V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Pull off the rubber strip at the rear of the opening for the right-hand rear door
-
Pull off the lower C-post panel at the upper edge so that the three upper screws release. This facilitates removal of the side panel later
-
Repeat the operation for the left-hand side.
-
Fold out the load securing eyelets on the right-hand side panel
-
Insert a scriber with an angled tip into the holes in the top of the covers (1). Turn the scriber so that the tip engages the reverse of the cover. Pull
the cover off
-
Remove the screws in the load securing eyelets
-
Remove the screw (2) at the front/top edge of the side panel
-
Pull off the side panel at the top so that the two clips at the rear/bottom of the side window and the clip at the bottom of the D-post release
-
Disconnect the connector for the 12V socket, if present
-
Lift out the side panel
-
Repeat the operation for the left-hand side.
-
Remove the right-hand floor support. First remove the three clips at the bottom of the compartment, then lift it up
-
Repeat the operation for the left-hand side
-
Place the supports for the floor in the cargo compartment to one side. New ones are in the kit.
