V50 L5-2.4L VIN 38 B5244S4 (2006)
Note! Before unplugging the connector, pull it forwards and secure in parking position (1). Otherwise the connector may fall into the door and
be difficult to retrieve.
Remove:
-
the connector
-
the handle.
Installation
Installing the outside handle rear side door
Install:
-
the connector. Remove from the parking position so that it goes into the door
-
the rubber seal
-
the handle
-
the lock bracket
-
the screw for the lock cylinder. Tighten. See: Tightening torque See: Specifications
-
the cover in the end of the door.
Check the function of the handle.