V50 L5-2.4L VIN 38 B5244S4 (2006)
Start at the rear edge of the side panel. Pull the panel straight out so that the 2 clips release.
Repeat the procedure at the front edge so that the 1 clip releases.
Installation
NOTE: For tightening torques, see: Tightening torque. See: Specifications
Installing the side panel in the cargo compartment
Press the side panel into place. Start at the front edge.
HINT: Detach the sill trim panel. Pull the sill trim panel straight up so that it is easier to install the side panel in the rear edge.