V50 L5-2.4L VIN 38 B5244S4 (2006)
Body Emblem: Service and Repair
Luggage Compartment Lid Badges
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the badge
Heat the badge carefully. Use a hot-air gun.
Carefully lift up one edge of the badge.
Note! Do not damage the vehicle's paintwork.
Remove:
-
the badge
-
any tape residue.
Installation
Installing the badge
Ensure that the vehicle is at least at room temperature (above +20 °C).
Wash the area for the badge. Use a mixture of 50% isopropanol and 50% water.
Wipe dry using a clean lint-free cloth.
Caution! In order for the emblem to stick, the surface must be clean and free of dust and grease.
Remove the backing from the tape.
Note! Leave the fixing foil in place.
Guide the badge into the position indicated in the dimensions.
Press the whole badge to ensure the tape is in good contact with the base.
Use the following measurements: