V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Cut just inside the marking so that the underneath of the spacer block lies against the bottom of the spare wheel well. Ensure that none of the
insulation panel is in between the spacer block and the wheel well
-
Reposition the spacer block.
-
Reposition the spare wheel.
-
Remove the locking washer. Unscrew the locking screw for the spare wheel mounting from the plastic cone. Place the screw to one side
-
Take the new long screw from the kit. Install the screw in the plastic cone. Lock using the locking washer.
