V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Position the cargo compartment wall with the clamps into the car.
-
Open the upper clamp and affix it loosely on the top bar of the safety grille.
-
Open the lower clamp and affix it as illustrated. Tighten the clamps only exactly as much as necessary to grip the grille, do not tighten them yet.
-
Adjust so that the cargo compartment wall is vertical and in the centre of the cargo compartment.
-
The support plate (1) must be parallel with the roof panel.
-
Screw down the rear support foot (2) so that the cargo compartment wall is tensioned.
-
Screw down the front support foot (3) so that the cargo compartment wall stands in a straight, vertical position.
-
Tighten the knobs (1) and (2).
-
Check that the cargo compartment wall does not make contact with the tailgate when it closes.
D-Pillar Panel
Panel, D-pillar
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.