V50 L5-2.4L VIN 38 B5244S4 (2006)
Image A applies to the S40 (04-)/V50, Image B applies to the C70 (06-)/C30
-
Make a small T-shape cut in the floor carpet, equally as wide as the mounting eyelet on the mounting in the position as illustrated. Use the
mounting to mark where the small cut should be located.
Image A applies to the S40 (04-)/V50, Image B applies to the C70 (06-)/C30
-
Insert the mounting eyelet through the small cut in the floor carpet. Position the mounting over the hole and the guide pin in the seat rail with the
washer on top.
-
Reinstall the screw. Torque tighten the screw to50 Nm (37 lbf.ft.).
-
Reinstall the cover panel over the seat mounting.
