V50 L5-2.4L VIN 38 B5244S4 (2006)
Detach the upholstery Velcro seams around the entire backrest cushion.
Fold the upholstery and the foam to one side so that the catch for the head restraint mounting becomes visible. Press in the catch using a small
screwdriver.
Pull the 2 head restraint mountings straight up. Remove the mountings.
Remove the foam and the upholstery from the frame.
Separate the upholstery from the foam by releasing the 10 clips.
HINT: Use a weatherstrip tool to undo the clips. It is also possible to thread the upholstery out through some of the clips.
Removing the backrest cushion upholstery (60%)
