V50 L5-2.4L VIN 38 B5244S4 (2006)
Install the mini spoiler on the rear windshield using protective tape.
The following measurements apply:
M1 = 1-2 mm
M2 = 1-2 mm
Mark the contours of the mini spoiler on the underside underneath using a suitable pen.
Installing the mini spoiler, continued
Mark out the contours of the mini spoiler on the rear windshield using tape, see illustration. This is to prevent any activator spillage ending up on the rear
windshield.
Installing the mini spoiler, continued
Apply the activator evenly using a top and the wipe using a lint-free cloth.
NOTE: Opened and re-closed bottles of activator only last 2-3 days.
HINT: For opening an unused bottle, mark it and check not to exceed the best before date.
Installing the mini spoiler, continued
Remove the backing from the tape.
Install the spoiler according to the given dimensions.
Press forcefully over the whole spoiler's surface so that the tape is in good contact with the base.
The following measurements apply:
M1 = 1-2 mm
M2 = 1-2 mm.
