V50 L5-2.4L VIN 38 B5244S4 (2006)
-
any tape remains. Use: 951 2942 and 951 2949.
Installation
Installing the mini spoiler
Wash the area for the spoiler with a mixture of 50%
isopropanol and 50% water.
Wipe dry using a clean lint-free cloth or similar.
NOTE: In order for the spoiler to adhere, the surface must be clean and free of dust and grease.
Installing the mini spoiler, continued
Install the mini spoiler on the rear windshield using protective tape.
The following measurements apply:
M1 = 1-2 mm
M2 = 1-2 mm
Mark the contours of the mini spoiler on the underside underneath using a suitable pen.
Installing the mini spoiler, continued
Mark out the contours of the mini spoiler on the rear windshield using tape, see illustration. This is to prevent any activator spillage ending up on the rear
windshield.
Installing the mini spoiler, continued
