V50 L5-2.4L VIN 38 B5244S4 (2006)
Brake Pedal Assy: Service and Repair
Brake Pedal, Replacing
NOTE: The information in this article/image has been updated by TSB TJ19397, 07-17-2008.
Brake pedal, replacing
Note: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Remove the following items:
-
Steering column
-
Accelerator pedal
Note: It is no longer necessary to remove the dashboard when replacing the brake pedal box.
Removal
Removing the brake pedal
Remove:
-
the connector (1)
-
the connector (2).
Cut off the tie straps for the cable harness.
Remove:
-
the 5 nuts (3)
-
the 1 screw (4)
-
the brake pedal together with the accelerator pedal (AP).
Remove the pin for the power brake booster.
Note: The pin cannot be separated entirely. It must be replaced with a new pin on installation.
Removing the accelerator pedal (AP)
Remove: