V50 L5-2.4L VIN 38 B5244S4 (2006)
Remove:
-
the brake pipe from the brake hose
-
the brake pipe from the clips.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Tightening Torque
Installing the brake pipes
Install:
-
the brake pipe on the ABS unit. Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the brake pipe on the brake hose. Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the brake pipe in the clips.
Bleeding brake systems
Remove the pedal jack.
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Check that the brake pipe connections are sealed.
Check the brake fluid level.
Installing the protective covers