V50 L5-2.4L VIN 38 B5244S4 (2006)
Clean the brake pipes terminals at the master cylinder and ABS unit.
Place paper under the master cylinder to avoid brake fluid spillage.
Remove the brake pipes between the master cylinder and the ABS unit.
Installation
Installing the brake pipes
Note! For tightening torques, see Specifications. See: Specifications/Tightening Torque
Install the brake pipes between the master cylinder and the ABS unit. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Bleeding brake systems
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Check that the brake pipe connections are sealed.
Check the brake fluid level.
Installing the protective covers
