V50 L5-2.4L VIN 38 B5244S4 (2006)
Install:
-
the brake hose (4) to the caliper. Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the brake hose (3) in the mounting
-
the retaining clip (2).
-
brake pipe in the hose (1). Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Note! Ensure that the brake hose is not twisted. If the brake hose is twisted, there is a risk of circuit failure.
Finishing
Remove the pedal jack.
Fill and bleed the brake system. To bleed the brake system, see: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Note! Use only Volvo Genuine parts brake fluid (Volvo DOT 4+).
Check:
-
the function of the brakes after bleeding
-
that there is no leakage
-
brake fluid level.
Depress the brake pedal a few times. Check the level of the brake fluid reservoir. Top up if necessary.
Install the wheel. See: Wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Rear Brake Flexible Hose
Rear Brake Flexible Hose
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
