V50 L5-2.4L VIN 38 B5244S4 (2006)
Parking Brake Cable: Service and Repair
Brake Cable Rear, Replacing
Brake cable rear, replacing
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Release adjustment.
Removal
Removing the exhaust system
Remove:
-
the 2 x nuts (1)
-
the screw (2) for the rubber mounting.
Note: Hang up the three-way catalytic converter (TWC) in a suitable position.
Remove the rubber mounting from the exhaust pipe. Hang the exhaust system to one side in a suitable way.
Removing the heat deflector plate
Remove:
-
the 4 x plastic nuts