V50 L5-2.4L VIN 38 B5244S4 (2006)
Remove:
-
the screws (1) for the limiter for the engine pad in the right-hand frame member
-
the limiter
-
the screws (2) for the engine mounting in the cylinder head
-
the engine mounting. Lower the engine approximately 60 mm.
Removing the belt tensioner
Remove:
-
screw for outer belt tensioner
-
outer belt tensioner
-
screw for inner belt tensioner
-
inner belt tensioner
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Tightening Torque
Installing the inner belt tensioner
Note! Ensure that the guide on the belt tensioner is correctly positioned.
Install:
-
inner belt tensioner
-
screw for inner belt tensioner. Tighten.
Installing the outer belt tensioner