V50 L5-2.4L VIN 38 B5244S4 (2006)
Note! Remove the seal.
Install the pressure line. Tighten.
Installing the engine pad
Install the engine pad according to the markings.
Installing components
Install:
-
the fender liner
-
the front wheel. See: Wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair. Lower the vehicle
-
the front belt covers
-
the screws for the front belt covers
-
the engine mounting on the cylinder head. Tighten. See Specifications. See: Specifications/Mechanical Specifications/Tightening Torque
-
limiter over the engine mounting right-hand side. Tighten to: Tightening torque See: Specifications/Mechanical Specifications/Steering. Remove
lifting beam: 999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam and hook: 999 5185 HOOK See: Tools and
Equipment/999 5185 Hook.
-
the expansion tank. Secure the hoses as described earlier.
