V50 L5-2.4L VIN 38 B5244S4 (2006)
Install:
-
new gaskets for the upper section of the intake manifold
Caution! Ensure that the guides for the lower section are in the correct position.
the upper intake manifold. Tighten the screws alternately. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Tightening
Torque.
-
the brake vacuum pipe
-
EVAP canister hose
Connect the connector for the throttle body (TB) connector and the connector for the pressure sensor on the intake manifold. Install a new tie strap.
Installing the starter motor
