V50 L5-2.4L VIN 38 B5244S4 (2006)
Housing Assembly HVAC: Service and Repair
Climate units
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Draining the air conditioning (A/C) system
Warning! Follow the safety instructions for work on air conditioning systems. See: Refrigerant See: Service Precautions/Technician Safety
Information
Read the instructions for slow and fast leaks acc. to: AC-system, oil, refilling See: Service and Repair/AC-System, Oil, Refilling.
Caution! Always use new O-rings lubricated with compressor oil.
Note! Plug the pipes and connections when working on the climate control system.
Drain the refrigerant from the AC-system acc. to: Refrigerant, draining See: Service and Repair/Refrigerant, Draining.
Draining coolant and removing components
Remove the expansion tank cap.
Raise the vehicle.
Remove the shield under the vehicle. It is secured with 7 clips. See the illustration.
Install a hose on the nipple at the radiator.
Feed the hose down to a container.
Open the nipple. Drain off the engine coolant.
