V50 L5-2.4L VIN 38 B5244S4 (2006)
Compass: Testing and Inspection
Compass Calibration
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Calibration
Setting the geographical area
Ignition on.
Press in the button (1) for at least 3 seconds. The figure for the set range (1-15) is then displayed. See the illustration.
Press the button repeatedly until the number (1-15) for the relevant geographical area is displayed. After approximately 10 seconds the display reverts to
the compass direction.
