V50 L5-2.4L VIN 38 B5244S4 (2006)
Connect the bleeding unit. See: Brake system bleeding with bleeding unit Open the bleed nipple on the caliper. Wait until there is new oil in the plastic
hose. Close the bleed nipple
Alternative 2:
Press down the brake pedal to the limit position. Keep it pressed down for approximately 2 seconds before releasing it. Repeat until there is new brake
fluid in the plastic hose. Close the bleed nipple when the brake pedal is fully depressed. Remove the hose. Install the protective cap. Remove the
G-clamp from the brake caliper. Repeat the process on the other front wheel. Install the wheel.
Replacing brake fluid, rear
Remove the brake caliper. See: Brake pads rear, replacing. Press the piston into the brake caliper. Use: 9995782 replace 5782-1 with: 999 7091
Remove the protective cap from the bleed nipple. Install the plastic hose on the nipple. Open the bleed nipple. Collect the brake fluid in a container.
Alternative 1:
Connect the bleeding unit. See Brake system bleeding with bleeding unit Open the bleed nipple on the caliper. Wait until there is new oil in the plastic
hose. Close the bleed nipple.
Alternative 2:
Press down the brake pedal to the limit position. Keep it pressed down for approximately 2 seconds before releasing it. Repeat until there is new brake
fluid in the plastic hose. Close the bleed nipple when the brake pedal is fully depressed. Remove the hose. Install the protective cap. Remove the tool.
Install the brake caliper. See: Brake pads rear, replacing. Repeat the process on the other rear wheel. Install the wheel.
