volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 4345 > < Procedures|Page 4343
Page 3
background image

Low level (topping up)

Top up with oil through the dipstick pipe. Take the temperature into account when topping up with oil.
Check the oil level again. See: Checking oil level.

High level (overfilling)

Warning! The oil may be very hot if the vehicle has just been driven. Avoid skin contact with the transmission oil.

Warning! The transmission must not be operated if the oil level is too high. This can cause increased operating temperatures and oil leakage.

Note! Strict cleanliness is important.

Drain off oil.
Undo the drain plug.
Allow some of the oil to drain out and reinstall the plug. Tighten. See: Tightening torque  See: Specifications/Mechanical Specifications/Automatic
Transmission/Transaxle/System Specifications/Tightening Torque.

Hint: The oil can also be sucked out through the dipstick pipe using an oil suction syringe with a narrow gauge hose.

Check the oil level again. See: Checking oil level.

Finishing

Installing the splash guard

After checking, install the splashguard under the engine.

Procedures|Page 4345 > < Procedures|Page 4343