V50 L5-2.4L VIN 38 B5244S4 (2006)
Slacken off the screw for the timing belt tensioner. Then turn the eccentric back so that the indicator reaches the marked position in the center of the
window. Remember to hold the center screw secure at the same time. Hold the eccentric in place and tighten the center screw.
Tighten. See Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque. Check that the
indicator is in the correct position.
Removing the adjustment tools
Remove:
-
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool from the trailing edge of the
camshafts
-
999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool
Install the plug together with a new seal washer. Tighten according to: Tightening torque See: Engine, Cooling and
Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque
Checking the markings and belt tension