V50 L5-2.4L VIN 38 B5244S4 (2006)
Fuel Rail: Service and Repair
Fuel injection supply manifold
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing upper intake manifold
Drain the fuel system. See: Fuel system pressure release See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel System Pressure Release.
Remove the air cleaner (ACL) module. See: Air filter module See: Air Cleaner Housing/Service and Repair.
Caution! Seal the openings in the lower part of the intake manifold with tape or similar.
Remove/loosen the hose clamp for the hose between the intake manifold and the mass air flow sensor.
Remove/loosen the screws, 6 pcs., for the upper intake manifold closest to the front plate and the screws, 2 pcs., opposite the firewall.
Lift up the intake manifold and fold it aside, place it on the battery box.
Draining the fuel system
Unplug the connector for the injectors as well as fuel the pressure sensor in the fuel rail.
Removing the injectors
