volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Bag Supplemental Restraint System|Page 2053 > < Air Bag Supplemental Restraint System|Page 2051
Page 1
background image

Air Bag Control Module: Service and Repair
Connector Supplemental Restraint System Module (SRS), Replacing

Leads

Connector supplemental restraint system module (SRS), replacing

Special tools:
951 2812
951 2637

NOTE:  The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.

Disassembly

Disassembling secondary lock

Press in the active catches on both sides of the socket housing and slide out the receptacle housings.

CAUTION:  Disconnect and work with only one cable at a time to minimize the risk of mixing them up.

Disassembling primary lock

Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool: 951 2812 or tool: 951 2637

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Air Bag Supplemental Restraint System|Page 2053 > < Air Bag Supplemental Restraint System|Page 2051