V50 L5-2.4L VIN 38 B5244S4 (2006)
Detach the apron molding from the booster cushion. It is secured with 4 clips on the underneath of the booster cushion.
Remove the booster cushion from the vehicle.
Installation
Note! For tightening torques, see Specifications. See: Body and Frame/Specifications
Installing booster cushions
Secure the apron molding on the underneath of the booster cushion using 4 clips.
Press into place.
Install:
-
the 2 M6 screws at the rear edge
-
the 2 M6 screws at the front edge.
Finishing
Function test
Check the function of the booster cushion.
