volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 13356 > < Procedures|Page 13354
Page 8
background image

-

Unscrew the two external clips at the front edge/bottom edge of the sill trim panel on the tailgate.

-

Pry up one of the corners of the sill trim panel using a weatherstrip tool so that the two clips at that end release.

-

Pull up the sill trim panel at the other end so that the remaining two clips release. Remove the sill trim panel.

-

Remove the rubber molding in the cargo compartment opening on the right-hand side, where it covers the right-hand side panel.

-

Fold the seat cushion and backrest on the right-hand side of the rear seat forward.

-

Grasp the upper edge of the right-hand side cushion (A). Pull the side cushion forward so that the clips on the reverse release.

-

Slide the side cushion upwards.

Illustrations A and B

Procedures|Page 13356 > < Procedures|Page 13354