volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 14618 > < Procedures|Page 14616
Page 1
background image

Wiring Harness: Removal and Replacement

Cable Shoe

Cable shoe

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Note! In 2003 the cable terminal with a pre-crimped cable section was introduced to the Volvo range. See the illustration. This method applies
for repairs with this type of cable terminal.

Caution! Ensure that the new pin has the same type of surface treatment as the old.

Caution! For repairing SRS wiring, see: Wiring harness supplemental restraint system (SRS) See: Auxiliary Power Outlet/Diagrams/Diagnostic
Aids/Cables/Wiring Harness Supplemental Restraint System (SRS)

Preparatory work

Procedures|Page 14618 > < Procedures|Page 14616