V50 L5-2.4L VIN 38 B5244S4 (2006)
Note! Ensure that the lifting table is centered under the subframe for optimal weight distribution. Check that the lifting table is correctly
applied against the subframe.
Remove the 3 screws on both sides.
Carefully lower the subframe approx. 100 mm.
Install a tensioning strap around the subframe and lifting device to make sure that the subframe does not fall off.
Lower the sub-frame.
Caution! Ensure that no cables / hoses are trapped when lowering the subframe.
Transferring components
Remove on both sides:
-
screw, 1 pc. (1)
-
screw, 1 pc. (2).