V50 L5-2.4L VIN 38 B5244S4 (2006)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Suspension
Spring
Special tools:
951 2945 Puller See: Tools and Equipment/951 2945 Puller
999 7076 Lever See: Tools and Equipment/999 7076 Lever
999 7088 Expander See: Tools and Equipment/999 7088 Expander
951 2911 Hydraulic piston See: Tools and Equipment/951 2911 Hydraulic Piston
951 2914 Claw See: Tools and Equipment/951 2914 Claw
999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Remove:
-
the wheel
-
1 screw (1).
Press in the drive shaft a little.
Removal
Removing the ball joint from the wheel spindle
Slacken off the nut so that the upper edge is above the screw.
Use an Allen key as a counterhold on the ball joint so that the boot is not damaged.