V50 L5-2.4L VIN 38 B5244S4 (2006)
Shifter A/T: Service and Repair
Gear Selector Lever Knob, Leather
Gear selector lever knob, leather
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The front page gives the date of this edition and the edition it replaces
-
The second page shows the tools needed for the installation and the contents of the installation kit
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
-
Cut out the text page in order to follow the illustrations and text at the same time.
Gear selector lever knob
Applies to manual gearboxes
-
Detach the gear selector lever knob by first pressing it down to the stop, and then turning it anticlockwise 90°.
-
Remove the gear selector lever knob with gaiter by prizing loose the gaiter from the centre console at the catches where indicated by the arrows,
and then pull the whole unit up.
