V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Pull the gear selector lever knob away from the gaiter.
-
Take the gear selector lever gaiter from the kit and turn it inside out.
-
Guide the gear selector lever knob inside the out-turned gear selector lever gaiter. The text on the gear selector lever knob must point towards the
two seams in the lower section of the gaiter.
-
Thread the gaiter onto the lower section of the knob maintaining the position of the gaiter and knob.
-
The lower section of the knob must be edge to edge with the small opening of the gaiter (see inset illustration).