V50 L5-2.4L VIN 38 B5244S4 (2006)
Install the cable harness for the transmission. Ensure that the guide for the connector comes between the lugs on the transmission. Ensure that the cable
harness is secured to the holders on the control system.
Installing the cable harness connector
Connect the connectors to the solenoid valves.
Install the oil temperature sensor using the holder and the M6 screw. Tighten.
Check that the cable harness is correctly located in its holders.
Finishing
Installing components
Install:
-
the control system cover. See: Cover, control system See: Fluid Pan/Service and Repair
-
the transmission control module (TCM). See: Transmission Control Module (TCM) See: Service and Repair/Removal and
Replacement/Automatic Transmission Components/Transmission Control Module (TCM).
