V50 L5-2.4L VIN 38 B5244S4 (2006)
1
Battery
2
Relay
3
Switch
4
Control module
5
Driver information module
6
Electric motor
7
Sensor
8
Actuator
9
Heating element
10
Light
11
Fuse
15
Electrical distribution rail/box
16
Audio
17
Service/diagnostics
18
Contact reel
19
Meter
20
Ignition component/shunt
27
Optics
31
Ground connection
63
Branching point
64
Connector
B. Branching points
The wiring diagrams contain numbered junction points, e.g. 63/352.
This information contains a section with a list of branching points. This list shows all the components that are connected to each branching point.
The location of the branching points is shown in the "Cable harness routing in vehicle"in Vehicle Level Connector Views.
C. Connectors
Connectors provide a bridge between two cable harnesses and are described in the "Connectors" in Vehicle Level Connector Views.
D: Electrical distribution
Operation of the fuses and relays is shown in the "Electrical distribution" in the Power and Ground Distribution Diagrams.
E. Data communication
Today's cars contain CAN and MOST networks that transfer information. Connections to these networks are not shown in their entirety in the respective
wiring diagram. Complete information on CAN and MOST communication is found in the "Control modules" in the Information Bus.
F. Abbreviations
A number of different abbreviations are used in the diagrams. These are explained in the "Wire Color Code and Other Abbreviations".
G. Component location
The appearance and location of components is described in numerical order in Vehicle Level Location components
