volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 21191 > < Diagram Information and Instructions|Page 21189
Page 7
background image

-

Remove the upper floor supports on the left and right-hand sides if applicable.

Removing the sill trim panel from the tailgate:

-

Unscrew the two external clips at the front edge/bottom edge of the sill trim panel on the tailgate

-

Pry up one of the corners of the sill trim panel using a weatherstrip tool so that the two clips at that end release

-

Pull up the sill trim panel at the other end so that the remaining two clips release. Remove the sill trim panel.

-

Detach the rubber strip where it covers the left-hand side panel in the boot opening.

Removing the left-hand side panel:

-

Remove the three clips (1) that hold the left-hand side panel in the bodywork

-

Unhook the side panel from the mounting (2) on the underneath of the parcel shelf

-

Fold out the rear edge of the side panel from the bodywork. At the same time unhook the side panel from the rear load securing eyelet

-

Fold out the side panel so that the amplifier at the rear of the wheel arch is accessible.

Applies to cars without RTI (road traffic information)

Diagram Information and Instructions|Page 21191 > < Diagram Information and Instructions|Page 21189