volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Towbar, Wiring, 4-pin|Page 22425 > < Towbar, Wiring, 4-pin|Page 22423
Page 7
background image

Applies to S40s manufactured after w720

-

Pull up the catch on the cover on the fuse box in the engine compartment. Pull up the cover and remove it.

Applies to S40s manufactured after w720

-

Take a 40A fuse from the kit and install it in terminal 14in fuse holder.

-

Reinstall the cover.

-

Reinstall the side panel. If the car has a 12V socket, connect the connector to this.

-

Reinstall the rubber strip in the tailgate opening.

-

Reinstall the sill trim panel in the tailgate opening.

-

Reinstall the upper floor supports if applicable.

-

Reinstall the cargo compartment carpet.

-

Program the software.

Applies to the V50

Preparations

Towbar, Wiring, 4-pin|Page 22425 > < Towbar, Wiring, 4-pin|Page 22423